Xconfig xrandr badmatch

16

Di recente ho installato minimamente il mio sistema operativo, ma ho riscontrato un errore imprevisto durante l'impostazione della risoluzione del mio monitor. sembra un problema molto vecchio, ma questa volta ci sono qualcos'altro (penso).

  1. per installare l'ambiente desktop: apt-get update,apt-get install xorg-core xserver-xorg-core gnome-core gdm3

  2. per installare le griglie grafiche apt-get install build-essential nvidia-kernel-common linux-headers-$(uname -r), i ./NVIDIA-Linux-x86_64-304.64.run passaggi sopra sembrano che tutte le cose siano nel modo corretto.

  3. alla risoluzione impostata: cvt 1440 900, xrandr --newmode xxx,xrandr --addmode VGA-0 xxx

poi ho avuto quell'errore: 

X Error of failed request:  BadMatch (invalid parameter attributes)
Major opcode of failed request:  153 (RANDR).
Minor opcode of failed request:  18 (RRAddOutputMode).
Serial number of failed request:  29.
Current serial number in output stream:  30

Non so di quali informazioni hai bisogno e ne elencherò alcune

modello di scheda grafica: nvidia gt630.

dimensione della memoria della scheda grafica: 512M ddr5.

monitor: phlips 190cw (1440x900, funziona bene su Windows). queste sono le mie impostazioni in Windows (non ho installato il driver del monitor e Windows lo riconosce come 190g6)

inserisci qui la descrizione dell'immagine

xrandr produzione

Screen 0: minimum 8 x 8, current 1280 x 1024, maximum 16384 x 16384
DVI-I-0 disconnected (normal left inverted right x axis y axis)
VGA-0 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 338mm x 270mm
   1280x1024      60.0*+   75.0  
   1024x768       75.0     70.1     60.0  
   800x600        75.0     72.2     60.3     56.2  
   640x480        75.0     72.8     59.9  
DVI-I-1 disconnected (normal left inverted right x axis y axis)
HDMI-0 disconnected (normal left inverted right x axis y axis)
  1440x900_60.00 (0x29f)  106.5MHz
        h: width  1440 start 1528 end 1672 total 1904 skew    0 clock   55.9KHz
        v: height  900 start  903 end  909 total  934           clock   59.9Hz

lshw -c video produzione

*-display               
   description: VGA compatible controller
   product: nVidia Corporation
   vendor: nVidia Corporation
   physical id: 0
   bus info: pci@0000:05:00.0
   version: a1
   width: 64 bits
   clock: 33MHz
   capabilities: pm msi pciexpress vga_controller bus_master cap_list rom
   configuration: driver=nvidia latency=0
   resources: irq:16 memory:f6000000-f6ffffff memory:e0000000-efffffff(prefetchable) memory:f0000000-f1ffffff(prefetchable) ioport:d000(size=128) memory:f7000000-f707ffff(prefetchable)

xorg.conf

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       30.0 - 83.0
    VertRefresh     55.0 - 75.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Ho TrID per ottenere EDID: apt-get install read-edid,sudo get-edid | parse-edid

ma ho ottenuto questo errore:

get-edid: get-edid version 2.0.0

    Performing real mode VBE call
    Interrupt 0x10 ax=0x4f00 bx=0x0 cx=0x0
    Function supported
    Call successful

    VBE version 300
    VBE string at 0x11100 "NVIDIA"

VBE/DDC service about to be called
    Report DDC capabilities

    Performing real mode VBE call
    Interrupt 0x10 ax=0x4f15 bx=0x0 cx=0x0
    Function supported
    Call successful

    Monitor and video card combination does not support DDC1 transfers
    Monitor and video card combination does not support DDC2 transfers
    0 seconds per 128 byte EDID block transfer
    Screen is not blanked during DDC transfer

Reading next EDID block

VBE/DDC service about to be called
    Read EDID

    Performing real mode VBE call
    Interrupt 0x10 ax=0x4f15 bx=0x1 cx=0x0
    Function supported
    Call failed

The EDID data should not be trusted as the VBE call failed
Error: output block unchanged

Ho provato a forzare la risoluzione a 1440x900 usando nvidia-settings, dopo il riavvio, la risoluzione è cambiata in 1440X1024 (nvidia-settings ha aggiunto una linea a xorg.conf Option "metamodes" "1440x1024 +0+0"). lo schermo diventa scorrevole all'orizzonte in questo modo:

inserisci qui la descrizione dell'immagine

Ho anche provato a estrarre edid.bin(usando nvidia-settings) e aggiungere Option "CustomEDID" "DFP-1:/etc/X11/edid.bin"a Section "Device"xorg.conf. grazie al fantastico postFixing Ugly DVI/HDMI Displays due to EDID bugs on nVidia drivers , ma purtroppo non funziona neanche.

aggiornare: var/log/Xorg.0.log

X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.0.0-1-amd64 x86_64 Debian
Current Operating System: Linux xx 2.6.32-5-amd64 #1 SMP Sun Sep 23 10:07:46 UTC 2012 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=df3ea9ad-faaf-4918-a213-5a673080e935 ro quiet
Build Date: 29 October 2011  06:58:14PM
xorg-server 2:1.7.7-14 (Julien Cristau <jcristau@debian.org>) 
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan  8 23:09:08 2013
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(**) Option "Xinerama" "0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType".
Entry deleted from font path.
(Run 'mkfontdir' on "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType").
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(II) Loader magic: 0x7c8a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7

(--) PCI:*(0:5:0:0) 10de:0f00:0000:0000 nVidia Corporation rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module  304.64  Tue Oct 30 11:18:32 PDT 2012
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver  304.64  Tue Oct 30 10:59:51 PDT 2012
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 05@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "CustomEDID" "DFP-0:/home/teifi/edid.bin"
(**) Jan 08 23:09:09 NVIDIA(0): Enabling 2D acceleration
(II) Jan 08 23:09:10 NVIDIA(GPU-0): Display (Philips 190G6 (CRT-1)) does not support NVIDIA 3D
(II) Jan 08 23:09:10 NVIDIA(GPU-0):     Vision stereo.
(II) Jan 08 23:09:10 NVIDIA(0): NVIDIA GPU GeForce GT 630 (GF108) at PCI:5:0:0 (GPU-0)
(--) Jan 08 23:09:10 NVIDIA(0): Memory: 1048576 kBytes
(--) Jan 08 23:09:10 NVIDIA(0): VideoBIOS: 70.08.aa.00.00
(II) Jan 08 23:09:10 NVIDIA(0): Detected PCI Express Link width: 16X
(--) Jan 08 23:09:10 NVIDIA(0): Interlaced video modes are supported on this GPU
(--) Jan 08 23:09:10 NVIDIA(0): Valid display device(s) on GeForce GT 630 at PCI:5:0:0
(--) Jan 08 23:09:10 NVIDIA(0):     CRT-0
(--) Jan 08 23:09:10 NVIDIA(0):     Philips 190G6 (CRT-1) (connected)
(--) Jan 08 23:09:10 NVIDIA(0):     DFP-0
(--) Jan 08 23:09:10 NVIDIA(0):     DFP-1
(--) Jan 08 23:09:10 NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
(--) Jan 08 23:09:10 NVIDIA(0): Philips 190G6 (CRT-1): 480.0 MHz maximum pixel clock
(--) Jan 08 23:09:10 NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
(--) Jan 08 23:09:10 NVIDIA(0): DFP-0: Internal Single Link TMDS
(--) Jan 08 23:09:10 NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
(--) Jan 08 23:09:10 NVIDIA(0): DFP-1: Internal Single Link TMDS
(**) Jan 08 23:09:10 NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
(**) Jan 08 23:09:10 NVIDIA(0):     device Philips 190G6 (CRT-1) (Using EDID frequencies has
(**) Jan 08 23:09:10 NVIDIA(0):     been enabled on all display devices.)
(WW) Jan 08 23:09:10 NVIDIA(0): No valid modes for "CRT-1:1440x900"; removing.
(WW) Jan 08 23:09:10 NVIDIA(0): No valid modes for "CRT-1:1280x800"; removing.
(II) Jan 08 23:09:10 NVIDIA(0): Validated MetaModes:
(II) Jan 08 23:09:10 NVIDIA(0):     "CRT-1:1024x768"
(II) Jan 08 23:09:10 NVIDIA(0):     "CRT-1:800x600"
(II) Jan 08 23:09:10 NVIDIA(0): Virtual screen size determined to be 1024 x 768
(--) Jan 08 23:09:10 NVIDIA(0): DPI set to (68, 65); computed from "UseEdidDpi" X config
(--) Jan 08 23:09:10 NVIDIA(0):     option
(--) Depth 24 pixmap format is 32 bpp
(II) Jan 08 23:09:10 NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
(II) Jan 08 23:09:10 NVIDIA:     access.
(II) Jan 08 23:09:10 NVIDIA(0): Setting mode "CRT-1:1024x768"
(II) Loading extension NV-GLX
(==) NVIDIA(0): Disabling shared memory pixmaps
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(==) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(WW) NVIDIA(0): Option "TwinView" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) Initializing extension GLX
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device USB Optical Mouse (/dev/input/event2)
(**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
(**) USB Optical Mouse: always reports core events
(**) USB Optical Mouse: Device: "/dev/input/event2"
(II) USB Optical Mouse: Found 3 mouse buttons
(II) USB Optical Mouse: Found scroll wheel(s)
(II) USB Optical Mouse: Found relative axes
(II) USB Optical Mouse: Found x and y relative axes
(II) USB Optical Mouse: Configuring as mouse
(**) USB Optical Mouse: YAxisMapping: buttons 4 and 5
(**) USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE)
(II) USB Optical Mouse: initialized for relative axes.
(II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event1)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device PC Speaker (/dev/input/event5)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event0)
(**) Macintosh mouse button emulation: Applying InputClass "evdev pointer catchall"
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) Jan 08 23:09:12 NVIDIA(GPU-0): Display (Philips 190G6 (CRT-1)) does not support NVIDIA 3D
(II) Jan 08 23:09:12 NVIDIA(GPU-0):     Vision stereo.
(**) Jan 08 23:09:12 NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
(**) Jan 08 23:09:12 NVIDIA(0):     device Philips 190G6 (CRT-1) (Using EDID frequencies has
(**) Jan 08 23:09:12 NVIDIA(0):     been enabled on all display devices.)
(II) Jan 08 23:09:12 NVIDIA(GPU-0): Display (Philips 190G6 (CRT-1)) does not support NVIDIA 3D
(II) Jan 08 23:09:12 NVIDIA(GPU-0):     Vision stereo.
(**) Jan 08 23:09:12 NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
(**) Jan 08 23:09:12 NVIDIA(0):     device Philips 190G6 (CRT-1) (Using EDID frequencies has
(**) Jan 08 23:09:12 NVIDIA(0):     been enabled on all display devices.)
(II) Jan 08 23:09:12 NVIDIA(GPU-0): Display (Philips 190G6 (CRT-1)) does not support NVIDIA 3D
(II) Jan 08 23:09:12 NVIDIA(GPU-0):     Vision stereo.
(**) Jan 08 23:09:12 NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
(**) Jan 08 23:09:12 NVIDIA(0):     device Philips 190G6 (CRT-1) (Using EDID frequencies has
(**) Jan 08 23:09:12 NVIDIA(0):     been enabled on all display devices.)
(II) Jan 08 23:09:59 NVIDIA(GPU-0): Display (Philips 190G6 (CRT-1)) does not support NVIDIA 3D
(II) Jan 08 23:09:59 NVIDIA(GPU-0):     Vision stereo.
(**) Jan 08 23:09:59 NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
(**) Jan 08 23:09:59 NVIDIA(0):     device Philips 190G6 (CRT-1) (Using EDID frequencies has
(**) Jan 08 23:09:59 NVIDIA(0):     been enabled on all display devices.)
(II) Jan 08 23:10:00 NVIDIA(GPU-0): Display (Philips 190G6 (CRT-1)) does not support NVIDIA 3D
(II) Jan 08 23:10:00 NVIDIA(GPU-0):     Vision stereo.
(**) Jan 08 23:10:00 NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
(**) Jan 08 23:10:00 NVIDIA(0):     device Philips 190G6 (CRT-1) (Using EDID frequencies has
(**) Jan 08 23:10:00 NVIDIA(0):     been enabled on all display devices.)
(II) Jan 08 23:10:00 NVIDIA(GPU-0): Display (Philips 190G6 (CRT-1)) does not support NVIDIA 3D
(II) Jan 08 23:10:00 NVIDIA(GPU-0):     Vision stereo.
(**) Jan 08 23:10:00 NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
(**) Jan 08 23:10:00 NVIDIA(0):     device Philips 190G6 (CRT-1) (Using EDID frequencies has
(**) Jan 08 23:10:00 NVIDIA(0):     been enabled on all display devices.)
(II) Jan 08 23:10:00 NVIDIA(0): Setting mode "VGA-0: nvidia-auto-select @1280x1024 +0+0"
(II) Jan 08 23:10:01 NVIDIA(GPU-0): Display (Philips 190G6 (CRT-1)) does not support NVIDIA 3D
(II) Jan 08 23:10:01 NVIDIA(GPU-0):     Vision stereo.
(**) Jan 08 23:10:01 NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
(**) Jan 08 23:10:01 NVIDIA(0):     device Philips 190G6 (CRT-1) (Using EDID frequencies has
(**) Jan 08 23:10:01 NVIDIA(0):     been enabled on all display devices.)

Qualsiasi aiuto è molto apprezzato. Grazie

nvidia  xorg  resolution  xrandr 
— Teifi
fonte
1
Non riesco a credere che am possa forzare la risoluzione a 1440X900 in Windows, ma Linux non può. Scusa per il pessimo inglese.
— Teifi,
(1) Qual è il modello della tua scheda video e quanta memoria ha? (2) In Windows quando si fa 1440x900, si utilizza il colore a 24 bit o 16 bit?
— John Siu,
@John Siu scusa per la risposta in ritardo. ho aggiornato la domanda （1） è gt630 con memoria ddr5 da 512 M. (2) usa il colore a 32 bit in windos.
— Teifi,
Pubblica il tuo /var/log/Xorg.0.log, forse usa pastebin.com in quanto è piuttosto lungo.
— John Siu,
@John Siu non può aprire pastebin.com, quindi ho aggiornato la domanda.
— Teifi,

Risposte:

11

Ho avuto questo problema "BadMatch":

 X Error of failed request:  BadMatch (invalid parameter attributes)
   Major opcode of failed request:  140 (RANDR)
   Minor opcode of failed request:  18 (RRAddOutputMode)
   Serial number of failed request:  27
   Current serial number in output stream:  28

E risolto modificando xorg.confmanualmente. Aggiungi o correggi questa riga in questa sezione del monitor:

HorizSync  30-82
VertRefresh  56-76

Salva, riavvia e voilà. La risoluzione è ok. Supponevo che il problema fosse lì perché ho usato un adattatore da D-sub a DVI. Il display aveva un connettore D-Sub, mentre la scheda era DVI. Il problema era solo sul driver nVidia di origine chiusa; Nouveau era OK.

— user218335
fonte
Questo ha funzionato per me (convertitore VGA su DVI-I) ma quando ho impostato il mio monitor su 1680x1050 (forzando la risoluzione utilizzando x-server) ha spostato il mio schermo verso destra di circa 300px. Ho risolto il problema ripristinando la frequenza di aggiornamento su 60 Hz (penso che x-server sia impostato automaticamente su 75 Hz quando si modifica la risoluzione).
— Edward,
1
Come si corregge l'errore segnalato dall'OP? Ho bisogno di usare il suo processo e ottenere la riga "--addmode" per non sbagliare, per la mia situazione.
— JosephK
Ciò non ha fatto alcuna differenza per me, l'errore si è ancora verificato dopo aver modificato HorizSync e VertRefesh.
— Garrettlynch,
Mi hai salvato la giornata! Stavo cercando e scavando sul web una soluzione, fino a quando non ho applicato la tua! Mi è persino passato per la mente di tornare a Windows. Dio ti benedica! :)
— Nick,
2

Metodo 1 - Cancella xorg.conf

Prova a rimuovere /etc/X11/xorg.conf, riavvia la tua x window e prova a impostare di nuovo la risoluzione con nvidia-settings. Di solito il rilevamento automatico funziona perfettamente con il cavo DVI. Ma non riesco a trovare le specifiche del monitor online, quindi non sono sicuro che abbia un connettore DVI.

Metodo 2 - riga delle modalità xorg.org

Prova ad aggiungere la riga Modalità nella sezione Schermo

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
        Modes    "1440x900" "1280x800" "1024x768" "800x600"
    EndSubSection
EndSection

addizionale

Aggiorna X Window e Nvidia Driver

La tua versione

X Window version

X.Org X Server 1.7.7
Release Date: 2010-05-04

(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0

Ubuntu 12.04

X.Org X Server 1.11.3
Release Date: 2011-12-16

[ 79635.469] (II) Module ABI versions:
[ 79635.469]     X.Org ANSI C Emulation: 0.4
[ 79635.469]     X.Org Video Driver: 11.0
[ 79635.469]     X.Org XInput driver : 16.0
[ 79635.469]     X.Org Server Extension : 6.0

Driver Nvidia attuale qui .

Sezione monitor xorg.conf ( sorgente )

Section "Monitor"
    Identifier "monitor0"
    VendorName "Plug'n Play"
    ModelName "Philips 190CW"
    HorizSync 30-83
    VertRefresh 55-75

    # Monitor preferred modeline (59.9 Hz vsync, 55.9 kHz hsync, ratio 16/10, 91 dpi)
    ModeLine "1440x900" 106.5 1440 1520 1672 1904 900 903 909 934 +hsync -vsync

    # TV fullscreen mode or DVD fullscreen output.
    # 768x576 @ 79 Hz, 50 kHz hsync
    ModeLine "768x576"     50.00  768  832  846 1000   576  590  595  630

    # 768x576 @ 100 Hz, 61.6 kHz hsync
    ModeLine "768x576"     63.07  768  800  960 1024   576  578  590  616

    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1440x900_120"  229.75  1440 1552 1712 1984  900 901 904 965  -HSync +Vsync

    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1440x900_100"  187.55  1440 1544 1704 1968  900 901 904 953  -HSync +Vsync

    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1440x900_85"  156.79  1440 1536 1696 1952  900 901 904 945  -HSync +Vsync

    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1440x900_75"  136.49  1440 1536 1688 1936  900 901 904 940  -HSync +Vsync

    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1440x900_60"  106.47  1440 1520 1672 1904  900 901 904 932  -HSync +Vsync

    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1440x900_50"  87.41  1440 1512 1664 1888  900 901 904 926  -HSync +Vsync

    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1280x800_120"  181.21  1280 1376 1520 1760  800 801 804 858  -HSync +Vsync

    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1280x800_100"  147.89  1280 1376 1512 1744  800 801 804 848  -HSync +Vsync

    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1280x800_85"  123.38  1280 1368 1504 1728  800 801 804 840  -HSync +Vsync

    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1280x800_75"  107.21  1280 1360 1496 1712  800 801 804 835  -HSync +Vsync

    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1280x800_60"  83.46  1280 1344 1480 1680  800 801 804 828  -HSync +Vsync

    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1280x800_50"  68.56  1280 1336 1472 1664  800 801 804 824  -HSync +Vsync
EndSection
— John Siu
fonte
Ho provato solo ora, ma i metodi 1 e 2 non funzionano per me ... cattive notizie anche questo monitor non ha un cavo DVI .. per favore, c'è un altro modo per configurare la risoluzione? Mi gratto i capelli e mi sento frustrato ...
— Teifi
Ci proverò, non ora ma dopo il lavoro. Spero che funzioni bene per me, in tal caso, la generosità è tua :)
— Teifi
È un po 'strano che tu abbia un nuovo kernel 3.x ma un pacchetto X11 così vecchio. Forse puoi prendere in considerazione la possibilità apt-get update; apt-get dist-upgradedi aggiornare tutti i tuoi pacchetti.
— John Siu,
2
Ho venduto il monitor, ne ho comprato uno nuovo e ho ottenuto la risoluzione corretta ...
— Teifi,
1
o ... k ... buona soluzione, LOL
— John Siu,
0

Ho aggiunto l'opzione "ModeValidation" "NoDFPNativeResolutionCheck, NoVirtualSizeCheck, NoMaxPClkCheck, NoHorizSyncCheck, NoVertRefreshCheck, NoWidthAlignmentCheck" al mio file Xorg.conf.

Funziona bene per me.

— user3189661
fonte
Utilizzando il nostro sito, riconosci di aver letto e compreso le nostre Informativa sui cookie e Informativa sulla privacy.
Licensed under cc by-sa 3.0 with attribution required.